The Burney Streamline made its public debut in late 1930, and it was difficult to mistake for anything else on British roads. Nearly nineteen feet long, with a rounded nose, a low passenger compartment, and a huge tapering rear section, the car looked more like an aircraft fuselage than a traditional luxury sedan. Sir Dennistoun Burney had moved development from the Howden airship works to Maidenhead, where his newly established Streamline Cars Limited began assembling more substantial versions of the original Alvis-based experiment. One of the principal specifications became known as the 22/80, referring to its approximately 22 taxable horsepower and 80 brake horsepower. Although the name suggests a conventional production model, Burney's cars were individually assembled and developed, with differences in bodywork and mechanical equipment between examples.

The 22/80 was powered by a 2,956cc Beverley-Barnes double-overhead-camshaft straight-eight mounted completely behind the rear axle. The engine drove forward through a short shaft to a four-speed gearbox and then to the rear wheels, reversing the mechanical arrangement familiar to most British motorists. Twin radiators positioned near the rear engine received air through openings above the back mudguards, while belt-driven fans assisted cooling. The chassis incorporated a substantial steel structure reinforced with cross-bracing and aircraft-style tensioning wires. Independent suspension was provided at each wheel, using transverse leaf springs, while Lockheed hydraulic brakes supplied stopping power. Perhaps the most remarkable detail was its maneuverability. Despite a wheelbase of 12 feet 5 inches (3.78 meters), the front wheels could turn through approximately 50 degrees, giving the car a turning circle of only 39 feet (11.9 meters). The body carried seven passengers, with spare wheels concealed inside the doors and the engine's mechanical noise largely isolated from those sitting toward the front.

At around £1,500, the Streamline was an expensive alternative to established luxury automobiles, but its engineering attracted attention from some serious observers. Rolls-Royce sent representatives to examine the car in December 1931, and their report provides one of the most useful contemporary assessments. The example they drove weighed approximately 40 cwt (2,032 kg), yet its ride quality was impressive and the engine was exceptionally quiet from the front seats. One engineer was surprised to discover that the straight-eight had reached 4,000 rpm because the usual mechanical noises were almost absent. They also noticed that the rear passenger compartment was noisier and that the suspension still required development. Burney claimed a maximum speed approaching 80 mph (129 km/h), although a contemporary road test encountered clutch slip at an indicated 76 mph. The 22/80 never became a standardized production automobile, but it provided the most substantial demonstration of Burney's ideas. Several examples were built, including cars supplied to wealthy customers and used in engineering evaluations, before unreliable engine supplies encouraged the company to experiment with other powerplants.


























